AP 120
TAMP ON OR TAMP BLOW APPLICATOR
FOR PRE-PRINTED LABELS
Pictures of the AP 120: |
AP 120 is a high performance applicator that combines the speed with the accuracy of the label positioning.
These features are obtained by means of a mechanism powered by two microprocessor driven stepping motor. With this configuration it is possible to maintain constant the web tension without any mechanical regulation. There are no clutches to calibrate or to maintain.
Both tamp-blow and tamp-on are suitable for applying labels at various attitudes, including top, side or bottom. The blow-on application is also possible, without tamp movement, as the automatic adaptation of the stoke lenght.
The microprocessor electronic calibrates automatically the photosensor for an easy label size changement.
The unwinder accomodates 3" (76mm) core label rolls with an external diameter up to 12" (305 mm) and a web width up to 120 mm.
The speed is adjustable up to
40 m/min by means of the keyboard.
Due to its high application speed the AP 120 can be used on very fast
conveyors too.
Its is very compact and the reduced thickness of only 245 mm allows an easy the integration in tight spaces. There are no external boxes, cables, consoles that complicate the installation and take extra room.
The external interface provides alarm and syncronization signals, so no other external devices are necessary.
Thanks to the "intelligent" drive of the stepping motors the power requrement is limited to not more than 120W at full speed.
TECHNICAL SPECIFICATIONS
| LABEL DIMENSIONS | min 20 x 20 mm, max 120 x 170 mm |
| ROLL DIAMETER | up to 305 mm |
| APPLICATION RATE | up to 180 labels/minute |
| PRECISION | +/- 0,8 mm |
| REWINDER | with step motor, microprocessor driven |
| DISPLAY | DISPLAY: back lit dot matrix LCD, 2 lines of 16 characters and two LEDs |
| CONTROLS | 3 keys allow the guided programming of the functions and the parameters of the applicator |
| DIMENSIONS (l x h x w) | approx 700 x 600 x 245 mm |
| WEIGHT | approx 30 kg |
| POWER SUPPLY | 90-240 VAC, 50-440 Hz, 120W max |
| ENVIRONEMENT | temperature from 5 to 35 °C, relative humidity from 20 to 90% (not condensing) |
| INTERFACE | synchronization, alarm and product sensing signals |
OPTIONS AND ACCESSORIES
P/N |
|
121.000 RH |
RIGHT HAND APPLICATOR |
121.000 LH |
LEFT HAND APPLICATOR |
| 121.151 | 500 mm STROKE KIT |
| 121.152 | VARIABLE STROKE KIT |
| 121.158 | EXCHANGEABLE TAMP KIT |
| 120.600 | PAPER END PRE-WARNING |
